Which Is A Valid Class B IP Address?

An IP address which belongs to class B has the first two bits in the first octet set to 10, i.e. Class B IP Addresses range from 128.0. x.x to 191.255. x.x. The default subnet mask for Class B is 255.255.

What is a class b ip address?

Class B IP address – Computer Definition In Internet Protocol version 4 (IPv4), a unicast address in the range to Class B addresses are identified by a beginning set of 2 bits in a 10 sequence.The next 14 bits identify the specific network, with 16,384 (2 14 ) theoretically possible.

What are class b ip addresses used for? Class B IP addresses are used for medium and large-sized networks in enterprises and organizations. They support up to 65,000 hosts on 16,000 individual networks. Class C addresses are most common and used in small business and home networks.

How do i find my class b ip address?

The Class B range is 128-191. For example, if you find an IP address that begins with 152, then you know that it’s a Class B address.

What is the class B private IP address range?

255.255. Class B: 172.16. 0.0 to 172.31. 255.255.

What is the subnet mask for Class B?

Class B networks use a default subnet mask of 255.255. 0.0 and have 128-191 as their first octet.

How big is a class B network?

Class B network addresses range from 128.0. 0.0 to 191.255. 255.255. The first 2 bits in a class B address are always 10 (128).

How do you subnet a class B network?

Class B – Two Bit Subnetting If we include two bits from the host part to the network part, the subnet mask is changed into 255.255. 192.0. The two bits added to network part can have four possible values in third octet, 00, 01, 10, and 11. That means, we can get four networks if we do a two bit subnetting.

What does IPv4 mean?

Internet Protocol Version 4

How many private IP addresses are there?

Private IPv4 addresses RFC1918 name IP address range Mask bits 24-bit block – 8 bits 20-bit block – 12 bits 16-bit block – 16 bits

What is the subnet for a class B network?

255.255. Octets 3 and 4 (16 bits) are for local subnets and hosts. Class B addresses are used for networks that have between 256 and 65534 hosts.

What is default gateway IP?

In the networking world, a default gateway is an IP address that traffic gets sent to when it’s bound for a destination outside the current network. On most home and small business networks—where you have a single router and several connected devices—the router’s private IP address is the default gateway.

What is my private IP?

To determine your computer’s private IP address, if you’re running Windows, click Start, then Run, then type cmd and press Enter. That should give you a command prompt. Type the command ipconfig and press Enter — this will show you your private IP address.

What are the 3 major classes of an IP network?

IP addressing supports three different commercial address classes; Class A, Class B, and Class C. In a class A address, the first octet is the network portion, so the class A address of, 10.1.

How do I find my IP range?

Running ipconfig on a Windows PC Click the Start menu. In Search/Run bar, type cmd or command, then press Enter. In the Command Prompt, type ipconfig or ipconfig/all, then press Enter. Using the available IP range determined by your router, run a ping command to an address in that range to confirm it is free for use.

Watch full movie for free, click here daily update 👉 https://justwatch.cc