How Wide Can A 12 Inch Sliding Miter Saw Cut?

12inch Saw

Saw with sliding arm can cut much wider although the maximum depth remains the same. For instance, a 12inch sliding compound miter saw will cut 2 x 16 wood in 90 degrees (crosscut), and when set at 45-degrees it can cut up to 2 x 12 lumber.

How wide of a board can a 12 inch sliding miter saw cut?

Like we said, the principal advantage of a sliding miter saw is that it allows you to cut wider boards. For a example, a 10” non-sliding saw will allow you to cross cut a board up to about 6” wide, while a 12” non-sliding will work for 8” boards (standard 2×8’s).

How wide of a board will a 10 inch sliding miter saw cut? A saw with a 10inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10inch saw will cut a two-by-four at a 45-degree angle.

How wide can a sliding miter saw cut?

The sliding saw can extend its reach out to 12 or even 16 inches, more than twice the width of a non-slider. If you’re routinely working with boards this wide, you will thank yourself every day for buying the sliding miter saw. And since you’re only cutting once, all your cuts will be cleaner and more precise.

Can a 12 inch miter saw cut a 4x4?

A 12inch miter saw blade is bigger than the 10-inch blade and it is able to cut wider, longer thicker pieces of wood. And with an appropriate miter saw it will easily take care of the 4×4 without an error.

Can I cut a 4x4 with a 12 inch miter saw?

12 inch blades will be able to cut longer, wider and thicker pieces or sheets of wood. Even some of the cheapest 12 inch miter saw blades are likely to cut easier into 4×4 than high-end specialized 10 inch blades. If you want to cut along the grain of a 4×4, regardless of saw, you’re better off with a 12 inch blade.

Should I get a 10 or 12 inch miter saw?

Trim is seldom more than 4 inches, so you’ve got plenty of wiggle room with a 10-inch miter saw. A 10-inch blade will spin faster than a 12-inch blade, resulting in smoother cuts. Equal motors powering the two blades will result in a higher RPM rate on the 10-inch blade and higher RPMs mean a finer finish.

Is a sliding miter saw worth it?

It’s definitely worth the investment if you know you’re going to use it but if you’re not sure about the kind of work you’ll be doing, a sliding miter saw might not be necessary. Another downside to sliding miter saws is they need a lot more space than a compound miter saw.

Should I buy a table saw or miter saw?

When it comes to this face-off, should you buy a table saw or a miter saw? A table saw can make longer cuts, while a miter saw excels in making short, beveled and angled cuts. A Table saw can make those same cuts if you have a jig, but it is more cumbersome.

Do I need a 12 inch miter saw?

Generally, the only reason you should consider buying a 12″ miter saw is if you plan to take on some larger jobs at some point. If you ever think you’ll need the power and cutting capacity a 12″ saw delivers and you’re not worried about the cost, it’s a worthwhile investment.

Can you rip with a miter saw?

You can’t use a rip blade for on a miter saw because the design of a miter saw is such that wood lays across its blade path and not along it. For this reason, you will not use a miter saw for ripping. Miter saws are powerful tools because they transcend regular carpentry jobs like cutting two-by-fours.

How big of miter saw do I need?

Unless you are cutting very large baseboards, I would recommend sticking with a 10 or 12-inch miter saw. A 10-inch miter saw can very easily and very accurately cut 6-inch baseboards. However, if you already have a 12-inch miter saw, that is perfectly fine for cutting baseboards.

What is the difference between a bevel and miter cut?

A miter cut refers to an angled cut on the face of two structures, which will be joined to make a corner called the miter joint. A bevel cut refers to an angled cut along the edge or end of the material. Miter cuts are made by pushing the flat on the table at an angle to the blade.

How wide can a 10 miter saw cut?

A typical 10-inch power miter saw can crosscut a board up to about 5 1/2 inches wide.

What's the difference between a compound miter saw and a sliding miter saw?

The main difference between a sliding compound miter saw and a compound miter saw is the rail or rails on the sliding saw. These rails allow you to slide the saw back and forward as you cut. The saw can do everything that a compound miter saw can do. This saw allows you to cut materials that are up to 16 inches thick.

Watch full movie for free, click here daily update 👉