First, open the switch’s cover and locate the 24-hour time dial.
Next, set the “On” and “Off” times by adjusting the two mechanical triggers attached to the dial.
The silver trigger will turn the system on; the black trigger will turn it off.
Adjust the 24-hour dial to match the time of day.
How do you set a tork timer?
How to Set Tork Timers
Press and hold the “Clock” button.
Press the “Day,” “Hour” and “Min” buttons (while continuing to hold “Clock”) to set the day, hour and minutes.
Release “Clock” when you set the desired time.
Press the “Reset” button.
Press and hold the “Set” button until the day of the week on the display starts to flash.
how does a timer switch work? A time switch (also called a timer switch, or simply timer) is a timer that operates an electric switch controlled by the timing mechanism. The timer may switch equipment on, off, or both, at a preset time or times, after a preset interval, or cyclically.
how do I reset my outdoor light timer?
How to Reset an Outdoor Lighting Timer
What is a Tork timer?
This Tork 1101 indoor steel 24-hour dial time switch is typically used to control swimming pool pumping systems, with or without water heaters. This Tork 1101 indoor steel 24-hour dial time switch is typically used to control swimming pool pumping systems, with or without water heaters.
How do you set an automatic light timer?
How to Set a Light Timer Plug the light timer up and ensure your bulb does turn on and is not blown out. Turn your switch to the auto setting. Set the pointer on your light timer to the current time. Press down the tabs located around your dial for the times you want the light to on.
How do you set a hyper tough timer?
To set the Hyper Tough Single Outlet Polarized Analog Indoor Mini Timer, you need to pull up all the black pins on the dial. Pulling it all up means off. To set the timer, you need to push down on the pins with the desired “on” times.
How do you set a Stanley timer?
Put the “ON/timer” switch located next to the dial to the “timer” position and plug the timer into the outlet. 3. Set the current time-turning clockwise align the arrowhead (see diagram) on the face of the timer to the present time (lines under numbers are in increments of 30 minutes).
How do you set a hyper tough indoor grounded timer?
The Hyper Tough 1025 Indoor Grounded Timer is nicely designed and a very easy timer to program. You simply turn the dial to set the ‘Time Now’ arrow to the current time and push down the button corresponding to the hour you want the timer to turn on.
Why does my light timer not work?
If the timer doesn’t activate the connected light, it might be working but the light bulb in the fixture might be burned out. Turn the light on manually via the switch timer. If the light still fails to turn on, the light bulb might be burned out. Replace the bulb with a new one.